August 12, 2025 - Janus Cycle Group

• Table size: 42” x 9” 
• Table travel: X-Axis 31”; Y-Axis 12”; Quill travel 5”; Knee travel (Z-Axis) 16”
• Ram travel: 12”
• Throat distance: 6.75” (min.) and 18.75” (max.)
• Workpiece max. weight: 750 pounds
• Head: J-head variable speed head
• Spindle tooling: R8 collets
• Speed range: 500 to 4200 RPMs
• Spindle speeds: Infinitely variable speeds
• Lube: One-shot lubrication system
• Power Down-feed
• Footprint: 8.3 ft. x 7.8 ft. x 87” high
• Weight: 1930 pounds
• Vise and Rotary Chuck assembly not included.  
• Tools in collet rack, drawbar wrench and R-8 drill chuck included. 
• Additional accessories located inside mill storage cabinet
• Roller Auction cannot assist in loading of this unit. Buyer is responsible for all aspects of removal or hiring a rigger to load and remove. Buyer may use any rigger of their choice or Click Here to view some options. Contact Doug at 303-289-1600 ext 118 with any questions.
• Pick up on this lot will be by appointment with owner August 18th - 20th.

• 14″ Swing
• 41″ Between Centers
• 1-3/8″ Spindle
• 1600 RPM
• 240V, Single Phase
• Variety of off the shelf and custom machined tooling for the purpose of bicycle frame building
• Tombstones for 34.9mm and 31.8mm Tubes plus some custom shapes as well
• Tombstone plate for mounting seat stay plate fixtures
• Original tool box
• Quick change tool holder as well as original standard tool post
• MT2 dead center
• Large selection of cutting tools and arbors, not all hole saws mounted to arbors
• Roller Auction cannot assist in loading of this unit. Buyer is responsible for all aspects of removal or hiring a rigger to load and remove. Buyer may use any rigger of their choice or Click Here to view some options. Contact Doug at 303-289-1600 ext 118 with any questions.
• Pick up on this lot will be by appointment with owner August 18th - 20th.

Includes Cutting tool arbor, mill table base with cone for alignment, Chris King 44mm headtube reaming cutter, Chris King headtube carbide insert facing tool.

• 13" Swing Over Bed
• 36" Distance Between Centers
• 1-1/2" Spindle Bore
• 120V
• Includes Bullnose Live Center, Regular Live Center, Jacob Chuck, Large MT2 Drill, Parting Tool, 2 Carbide Cutters, Additional Faceplate, Steady Rest, Misc Small Tools
• No Quick Change has Traditional Tool Post
• Roller Auction cannot assist in loading of this unit. Buyer is responsible for all aspects of removal or hiring a rigger to load and remove. Buyer may use any rigger of their choice or Click Here to view some options. Contact Doug at 303-289-1600 ext 118 with any questions.
• Pick up on this lot will be by appointment with owner August 18th - 20th.

• ERGO 6060 Cabinet
• Interior Dimensions 60" x 60" x 44"
• Overall Dimensions 62" x 66" x 78"
• Door Opening 50" x 40"
• 900CFM Reclaimer Ventilation Rate
• 2HP Exhaust Fan
• Safety-Glass Window Dimensions 14" x 22"
• 3/16" Perforated Floor With 1000Lb Capacity
• Roller Auction cannot assist in loading of this unit. Buyer is responsible for all aspects of removal or hiring a rigger to load and remove. Buyer may use any rigger of their choice or Click Here to view some options. Contact Doug at 303-289-1600 ext 118 with any questions.
• Pick up on this lot will be by appointment with owner August 18th - 20th.

• Roller Auction cannot assist in loading of this unit. Buyer is responsible for all aspects of removal or hiring a rigger to load and remove. Buyer may use any rigger of their choice or Click Here to view some options. Contact Doug at 303-289-1600 ext 118 with any questions.

• Base Mount
• 25 HP
• 125 PSI Pressure Rating
• 122.3 CFM Capacity
• 208-230/460V, 3PH, 60A
• Elektronikon Swipe Controller
• Roller Auction cannot assist in loading of this unit. Buyer is responsible for all aspects of removal or hiring a rigger to load and remove. Buyer may use any rigger of their choice or Click Here to view some options. Contact Doug at 303-289-1600 ext 118 with any questions.
• Pick up on this lot will be by appointment with owner August 18th - 20th.

• Roller Auction cannot assist in loading of this unit. Buyer is responsible for all aspects of removal or hiring a rigger to load and remove. Buyer may use any rigger of their choice or Click Here to view some options. Contact Doug at 303-289-1600 ext 118 with any questions.

• Table or Mill Mounted
• 115mm (4.5”) radii dies: 12.7mm (1/2”), 16mm (5/8”), 19mm (3/4”), 22.2mm (7/8”), 27.2mm (seat post diameter material) 
• 230mm (9”) radii dies:  12.7mm (1/2”), 16mm (5/8”), 19mm (3/4”), 22.2mm (7/8”), 34.9mm (1-3/8”), 38.1 (1-1/2”)
• 170mm (6.75”) radius die: 31.6mm (seat post diameter material) 
• 2 additional brass lead nuts

• 12' Tig Lead with #17 Torch and Furick Cup Assembly
• 12' Ground Lead
• Miller 14-Pin Wireless Foot Pedal Remote
• (Does not include torch holder, welding table, hood or any accessories other than the welder, leads, torch and remote)

Dummy Axles

• Shimano 142
• Shimano 148
• Syntace 148
• Syntace Mod'd for UDH 142

BB Offsets

• T47 74/68
• 92.5/87.5 
• 86.5
• BSA 68
• BSA 73

Headset Standards

• 1.125
• 44mm

Seat Post Offsets

• 34.9 , 31.8

DT offsets

• 34.9
• 38.1
• 42

Tire Pucks

• 35mm
• 50mm
• 76mm

Curved Seat Tube Offset Seat Tube Cone

4-Way Push to Connect Purge Line Assembly

• Butt Profile is 1.4mm/0.8mm/1.1mm